rozdzielacz DHE

Hydraulic directional valves of the DHE series are available in different versions: standard, safety valves acc. to Machinery Directive 2006/42/EC and safety valves for vertical presses and torque bar press brakes. DHE valves are designed for NG06/CETOP3 plate mounting. The purpose of this valves is to control the oil flow direction in hydraulic system. Due to this action, it is possible to extend the piston rod of an hydraulic cylinder or to change the direction of rotation of a hydraulic motor.

Maximum oil flow: up to 80 lpm, opetaring pressure in P, A, B ports: 350 bar, in T port: 210 bar (DC) and 160 bar (AC) 

DHE directionals have similar hydraulic parameters to DHL valves, but the main difference is the permissible higher oil flow rate and the possibility of the special executions – versions with spool position monitoring (/FI and /FV) and specific spool execution and inductive position switch (130105 DHE). Depending on the type of the spool, they can be equipped with 1 or 2 coils controlled by DC or AC. Atos offers a wide selection of spools, incl. popular D, E, J, H and G and coil voltages, including 12 and 24V DC, 110/50 and 230/50V AC.

Spool types

suwaki DHE











Technical data

Solenoid directional valves type DHE
SizeNG06, CETOP 3
Maximum flow [l/min]80 (standard)
50 (130105 DHE)
Operating pressure in P, A, B ports [bar]350
Operating pressure in T port [bar]210 (DC)
160 (AC)
Fluid temperature range [°C]-20 ÷ +80
Fluid viscosity15 cSt ÷ 100 cSt (recommended)
2,8 cSt ÷ 500 cSt (acceptable)
Filtration ISO 4406 class 21/19/16
Coil type DC [V]12
Coil type AC [V]24/50/60

110/50 - 120/60: 110 RC
230/50 - 230/60: 230 RC
Spool position monitoring (optional)FI - inductive proximity sensor (NO or NC)
FV - inductive position switch providing (NO and NC)
Weight DC [kg]1,5 (spools -06)
2,0 (spools -07)
Weight AC [kg]1,4 (spools -06)
1,8 (spools -07)