HEKTOS - oferta hydrauliki siłowej

Piston Accumulators APL

Fotografia hydroakumulatorów APL

The APL piston accumulators are new extremely durable series of accumulators by Hydro Leduc. The APL accumulators are used mainly for energy storage in hydraulic systems. They are distinguished by the ability to work in any position. 

Nominal capacity: from 0.5 through 4 dm3; maximum allowable operating pressure: 250 bar

Read more...

AS Diaphragm Accumulators

Zdjęcie akumulatora hydraulicznego typu AS

Hydroaccumulators AS have elastomer diaphragm which is partition between a gas and a liquid. The AS accumulators are more durable due to less deformation of the diaphragm in comparsion with the bladder hydroaccumulators. The membrane can be replaced.

Nominal capacity: from 0.02 to 10 dm3; maximum operating pressure: up to 400 bar.

Read more...

ABVE Bladder Accumulators

Akumulator hydrauliczny ABVE - fotografia produktu

Hydraulic accumulators ABVE are dedicated most of all to the energy storage as hydraulic fluid under pressure. They are widely used in automatic machines and mobile applications. The ABVE accumulators are interchngeable with most bladder accumulators in market.

Nominal capacity: from 4 through 50 dm3; maximum operating pressure: up to 350 bar.

Read more...

Bladder Accumulators ACSL

Zdjęcie hydroakumulatorów ACSL produkcji Hydro Leduc

Hydro-pneumatic accumulators ACSL are dedicated to hydraulic energy store, pulsation dampening and vehicle suspension for applications with pressure below 250 bar. These accumulators also can be used as a shock absorbing units in vehicle suspension, parts of agricultural machinery etc. 

Nominal capacity: from 0.7 through 4 dm3; maximum operating pressure: up to 250 bar. 

Read more...

Bladder Accumulators ACS

Akumulatory hydrauliczne ACS - fotografia

ACS series hydropneumatic accumulators are mainly dedicated to energy store, and pulsation dampening in hydraulic systems. These accumulators also can be used as a shock absorbing units in vehicle suspension, hydraulic springs etc.

Nominal capacity: form 0.7 through 4 dm3; maximum operating pressure: up to 330 bar.

Read more...

Direct Acting Relief Valves of RD Series

Zawory przelewowe bezpośredniego działania

Direct acting relief valves of RD series are used to limit the pressure in a hydraulic system. No initial stage allows for a faster response to the increased pressure and results in better tolerance to oil contamination.

Maximum pressure 350 bar, maximum permissible flow from 95 to 760 lpm.

 

Read more...

  • Hydraulic Pumps

    Hydraulic pumps of all types in the offer. According to various divisions Hektos offers open loop, semi-open, and closed loop pumps, fixed and variable displacement units. According to various design possibilities of hydraulic pumps, Hektos proposes axial and radial piston pumps, hydraulic vane pumps, gear pumps of internal and, external gear, and screw pumps. Pumps for vehicles, construction machinery, and industrial machines. We offer products interchangeable with many other types, and unique solutions available on request.

     

    Article Count:
    15
  • Silniki hydrauliczne
    5

    Silniki hydrauliczne wszystkich typów do napędu maszyn, urządzeń i pojazdów. Prezentujemy tanie silniki orbitalne o charakterystyce wspólnej dla podobnych dostępnych na rynku towarów OMZR, OMZS, OMZT, a także oferujące wyższe osiągi silniki tłoczkowe skośne M, MX, MXR, MSI oraz radialne ITM, a także silniki łopatkowe. Szybkoobrotowe silniki skośne mogą być stosowane do napędu sprężarek, wciągarek czy nawet śrub łodzi, czy napędu pojazdów i maszyn jak kruszarki, wiertnice itp. Wolnoobrotowe silniki promieniowe ITM o dużym momencie obrotowym nadają się do napędu pojazdów, oraz maszyn. Stosowane są np. we wtryskarkach. Mogą przy tym startować przy pełnym obciążeniu. Silniki orbitalne nadają się z kolei do większości zastosowań, gdzie trzeba prostych i tanich rozwiązań.

     

    Article Count:
    15
  • Hydropneumatic Accumulators

    Hydropneumatic accumulators are pressure vessels with gas-fluid separator. The separator may have form of bladder, diaphragm, or piston, according to a type of the accumulator, and application desired.

     

    Article Count:
    5
  • Hydraulic Valves

    All types of hydraulic valves, and complete control systems for hydraulics. One can find information about directional valves, cartridge valves, manifold, proportional, and in-line models. Due to complexity of applications, and options available, not whole product range has been presented below.

     

    Article Count:
    14
    • Cartridge Valves

      Wide range of cartridge valves makes it easy to use in hydraulic systems with flows to 760 lpm, and working pressure to 350 bar.

       

      Article Count:
      8
    • Monoblock Directional Valves

      Monoblock directional valves of simple design are widely used in mobile hydraulics, esp. agricultural machines.

       

      Article Count:
      4
    • Solenoid directional control valves

      Directional control valves (size 6 and 10) are adapted to plate mouting. They are electrically controlled by two solenoids. The DSG control valves are characterized by a wide range of spools, so various receiver control functions can be implemented.

      Article Count:
      2
  • Microhydraulics

    Advanced micro hydraulic parts can mainly be identified by small flow levels and displacements. Wide range of parts offered allows to arrange whole micro systems. Microhydraulics can be widely applied in oil and gas research, military applications, aviation, and oceanographic research.

    Article Count:
    1
  • Akcesoria i części hydrauliczne
    5 Akcesoria i części zamienne do układów hydraulicznych. Mieszczą się tu chłodnice, zbiorniki, technika pomiarowa i oprzyrządowanie, elementy złączne, wkłady do pomp łopatkowych, wały, uszczelnienia oraz filtry.
    Article Count:
    2
  • Chłodnice oleju

    Olejowo-powietrzne i olejowo-wodne wymienniki ciepła stosowane w hydraulice siłowej.

    Article Count:
    1
  • Pomiary

    Elementy, układy pomiarowe oraz przyrządy pomiarowe stosowane w hydraulice siłowej. Pomiary ciśnienia, przepływu, temperatury, czystości oleju, itd. Testery, i urządzenia diagnostyczne do wykorzystania w układach hydraulicznych.

     

    Article Count:
    6

Hektos - Facebook