HEKTOS - oferta hydrauliki siłowej

MSI Hydraulic Piston Motors

Hydraulic piston motors MSI are designed to perform the most demanding operating conditions. Their construction allows for optimum integration into receiving unit, and in particular a planetary gearbox. This combination enables to obtain similar torque as in case of low speed motors. The MSI motors can achieve power over 10 kW per kilo.

 

Rotational speed range: from 50 through 6900 rpm; maximum continuous pressure: up to 400 bar.

Read more...

MXP hydraulic piston motors

MXP piston motors are equipped with bent axis technology, which yields wide range of rotating speeds and compact size. The MXP series is dedicated to mobile intermittent use for short periods of time. They can provide high global efficiency of over 90% in most applications.

 

Rotational speed range: from 200 through 8000 rpm; maximum continuous pressure: up to 400 bar.

Read more...

MM-MMS orbital hydraulic motors

Orbital hydraulic motors MM and MMS are lightweight, small gerotor motors produced by M+S Hydraulic company. They are designed for continiuous work in light conditions. The MM motors can transfer low power at relatively high rotational speed in comparsion with other motors with similar construction. They can reach maximum power up to 3.2 kW.

 

Rotational speed range: from 20 through 1950 rpm; maximum continuous pressure: up to 105 bar.

Read more...

MP orbital motors

Silniki MP

Hydraulic orbital motors MP by M+S Hydraulic are the most popular gerotor type motors. The MP series consists of motors of maximum speed from 95 to 1600 rpm and maximum power from 3.3 to 12.8 kW. Simple and cheap construction works in light conditions and when high speed is required.

 

Rotational speed range: from 10 through 1600 rpm; maximum continuous pressure: up to 140 bar.

Read more...

BMR hydraulic motors

BMR orbital hydraulic motors of Rolltorq brand are low-speed unit designed to operate at low and medium loads. They are distinguished by a shaft bearings, which greatly increases their life span. BMR form a series of models with maximum speeds between 160 and 775 rpm, and the maximum power up to 10 kW.

 

Rotational speed range: from 5 through 775 rpm; maximum continuous pressure: up to 140 bar.

Read more...

MR hydraulic motors

Silniki MR

The MR orbital motors by M+S Hydraulic are medium size and light construction hydraulic motors. They are characterized by appreciable torque and low rotational spees. The MR series consists of models with rotational speed range from 150 to 775 rpm and maxiumum output power range from 4 to 13 kW.

 

Rotational speed range: from 10 through 775 rpm; maximum continuous pressure: up to 175 bar.

Read more...

  • Hydraulic Pumps

    Hydraulic pumps of all types in the offer. According to various divisions Hektos offers open loop, semi-open, and closed loop pumps, fixed and variable displacement units. According to various design possibilities of hydraulic pumps, Hektos proposes axial and radial piston pumps, hydraulic vane pumps, gear pumps of internal and, external gear, and screw pumps. Pumps for vehicles, construction machinery, and industrial machines. We offer products interchangeable with many other types, and unique solutions available on request.

     

    Article Count:
    15
  • Silniki hydrauliczne
    5

    Silniki hydrauliczne wszystkich typów do napędu maszyn, urządzeń i pojazdów. Prezentujemy tanie silniki orbitalne o charakterystyce wspólnej dla podobnych dostępnych na rynku towarów OMZR, OMZS, OMZT, a także oferujące wyższe osiągi silniki tłoczkowe skośne M, MX, MXR, MSI oraz radialne ITM, a także silniki łopatkowe. Szybkoobrotowe silniki skośne mogą być stosowane do napędu sprężarek, wciągarek czy nawet śrub łodzi, czy napędu pojazdów i maszyn jak kruszarki, wiertnice itp. Wolnoobrotowe silniki promieniowe ITM o dużym momencie obrotowym nadają się do napędu pojazdów, oraz maszyn. Stosowane są np. we wtryskarkach. Mogą przy tym startować przy pełnym obciążeniu. Silniki orbitalne nadają się z kolei do większości zastosowań, gdzie trzeba prostych i tanich rozwiązań.

     

    Article Count:
    15
  • Hydropneumatic Accumulators

    Hydropneumatic accumulators are pressure vessels with gas-fluid separator. The separator may have form of bladder, diaphragm, or piston, according to a type of the accumulator, and application desired.

     

    Article Count:
    5
  • Hydraulic Valves

    All types of hydraulic valves, and complete control systems for hydraulics. One can find information about directional valves, cartridge valves, manifold, proportional, and in-line models. Due to complexity of applications, and options available, not whole product range has been presented below.

     

    Article Count:
    14
    • Cartridge Valves

      Wide range of cartridge valves makes it easy to use in hydraulic systems with flows to 760 lpm, and working pressure to 350 bar.

       

      Article Count:
      8
    • Monoblock Directional Valves

      Monoblock directional valves of simple design are widely used in mobile hydraulics, esp. agricultural machines.

       

      Article Count:
      4
    • Solenoid directional control valves

      Directional control valves (size 6 and 10) are adapted to plate mouting. They are electrically controlled by two solenoids. The DSG control valves are characterized by a wide range of spools, so various receiver control functions can be implemented.

      Article Count:
      2
  • Microhydraulics

    Advanced micro hydraulic parts can mainly be identified by small flow levels and displacements. Wide range of parts offered allows to arrange whole micro systems. Microhydraulics can be widely applied in oil and gas research, military applications, aviation, and oceanographic research.

    Article Count:
    1
  • Akcesoria i części hydrauliczne
    5 Akcesoria i części zamienne do układów hydraulicznych. Mieszczą się tu chłodnice, zbiorniki, technika pomiarowa i oprzyrządowanie, elementy złączne, wkłady do pomp łopatkowych, wały, uszczelnienia oraz filtry.
    Article Count:
    2
  • Chłodnice oleju

    Olejowo-powietrzne i olejowo-wodne wymienniki ciepła stosowane w hydraulice siłowej.

    Article Count:
    1
  • Pomiary

    Elementy, układy pomiarowe oraz przyrządy pomiarowe stosowane w hydraulice siłowej. Pomiary ciśnienia, przepływu, temperatury, czystości oleju, itd. Testery, i urządzenia diagnostyczne do wykorzystania w układach hydraulicznych.

     

    Article Count:
    6

Hektos - Facebook