HEKTOS - oferta hydrauliki siłowej

External gear pumps RJ

Hydraulic pumps RJ Pompy zębate RJ are external gear units made of cast iron. Solid construction of these pumps and high quality components allow to operate at 250-280 bar of maximum continuous pressure. These pumps are used in open loop systems and in particular they are used in construction machines (eg loaders, excavators).

 

Maximum continuous pressure up to 280 bar, the displacement range from 23 to 36 cc/rev.

Read more...

BG20 series Gear Pumps

Pompa hydrauliczna zębata BG20

Hydraulic gear pumps of BG20 series are external gear pumps of group 2 made of alumunium alloys. They are designed for general use in the medium pressure range. Studied design, good materials, excellent workmanship and quality control determine the better performance and versatility. They are used in industrial and mobile applications.

Maximum continuous pressure up to 290 bar, the displacement range from 4 to 26 cm3 / rev.

 

Read more...

XPi hydraulic pumps

pompa XPi

XPi hydraulic piston pumps are designed in bent axis technology and are successors of well known XP, and X series by Hydro Leduc from France. These are the first bent axis pumps on the market which do not need to adjust the pump to the drive's direction of rotation. Pump automatically sets to required direction of rotation. Simply connect the suction and discharge lines to the right place.

 

Maximum rotational speed: up to 3150 rpm; maximum continuous pressure: up to 380 bar.

Read more...

TXV variable displacement pumps

TXV series variable displacement hydraulic pumps is an axial-piston design with variable swashplate. Stroke and therefore the pump flow is determined by the angle at which the swashplate is inclined relative to its axis. TXV variable pumps equipped with load sensing control (LS) are used where economical life cycle addition to the high performance applications counts.

 

Maximum continuous pressure up to 400 bar, displacements: 25* to 150 cm3/rev.

 

Read more...

PA and PAC axial piston pumps

Fixed displacement axial piston hydraulic pumps PA are mostly dedicated to mobile applications. Either clockwise or counter-clockwise direction of rotation, the relative insensitivity to pollutants, excellent bearing and double sealing make them ones of the most long-lasting pumps on the market.  The PAC piston pumps are compact versions of PA series.

 

Maximum rotational speed: up to 2500 rpm; maximum pressure: up to 500 bar.

Read more...

W bent axis pumps

Fixed displacement bent axis hydraulic pumps W are dedicated to industrial applications. With high performance and solid construction these pumps can be used in the most demanding industrial conditions. The W pumps are lighter options with reduced dimension than all comparable bent axis piston pumps, so they can be used in limited space.

 

Maximum rotational speed: up to 3150 rpm; maximum continuous pressure: up to 400 bar.

Read more...

  • Hydraulic Pumps

    Hydraulic pumps of all types in the offer. According to various divisions Hektos offers open loop, semi-open, and closed loop pumps, fixed and variable displacement units. According to various design possibilities of hydraulic pumps, Hektos proposes axial and radial piston pumps, hydraulic vane pumps, gear pumps of internal and, external gear, and screw pumps. Pumps for vehicles, construction machinery, and industrial machines. We offer products interchangeable with many other types, and unique solutions available on request.

     

    Article Count:
    15
  • Silniki hydrauliczne
    5

    Silniki hydrauliczne wszystkich typów do napędu maszyn, urządzeń i pojazdów. Prezentujemy tanie silniki orbitalne o charakterystyce wspólnej dla podobnych dostępnych na rynku towarów OMZR, OMZS, OMZT, a także oferujące wyższe osiągi silniki tłoczkowe skośne M, MX, MXR, MSI oraz radialne ITM, a także silniki łopatkowe. Szybkoobrotowe silniki skośne mogą być stosowane do napędu sprężarek, wciągarek czy nawet śrub łodzi, czy napędu pojazdów i maszyn jak kruszarki, wiertnice itp. Wolnoobrotowe silniki promieniowe ITM o dużym momencie obrotowym nadają się do napędu pojazdów, oraz maszyn. Stosowane są np. we wtryskarkach. Mogą przy tym startować przy pełnym obciążeniu. Silniki orbitalne nadają się z kolei do większości zastosowań, gdzie trzeba prostych i tanich rozwiązań.

     

    Article Count:
    15
  • Hydropneumatic Accumulators

    Hydropneumatic accumulators are pressure vessels with gas-fluid separator. The separator may have form of bladder, diaphragm, or piston, according to a type of the accumulator, and application desired.

     

    Article Count:
    5
  • Hydraulic Valves

    All types of hydraulic valves, and complete control systems for hydraulics. One can find information about directional valves, cartridge valves, manifold, proportional, and in-line models. Due to complexity of applications, and options available, not whole product range has been presented below.

     

    Article Count:
    14
    • Cartridge Valves

      Wide range of cartridge valves makes it easy to use in hydraulic systems with flows to 760 lpm, and working pressure to 350 bar.

       

      Article Count:
      8
    • Monoblock Directional Valves

      Monoblock directional valves of simple design are widely used in mobile hydraulics, esp. agricultural machines.

       

      Article Count:
      4
    • Solenoid directional control valves

      Directional control valves (size 6 and 10) are adapted to plate mouting. They are electrically controlled by two solenoids. The DSG control valves are characterized by a wide range of spools, so various receiver control functions can be implemented.

      Article Count:
      2
  • Microhydraulics

    Advanced micro hydraulic parts can mainly be identified by small flow levels and displacements. Wide range of parts offered allows to arrange whole micro systems. Microhydraulics can be widely applied in oil and gas research, military applications, aviation, and oceanographic research.

    Article Count:
    1
  • Akcesoria i części hydrauliczne
    5 Akcesoria i części zamienne do układów hydraulicznych. Mieszczą się tu chłodnice, zbiorniki, technika pomiarowa i oprzyrządowanie, elementy złączne, wkłady do pomp łopatkowych, wały, uszczelnienia oraz filtry.
    Article Count:
    2
  • Chłodnice oleju

    Olejowo-powietrzne i olejowo-wodne wymienniki ciepła stosowane w hydraulice siłowej.

    Article Count:
    1
  • Pomiary

    Elementy, układy pomiarowe oraz przyrządy pomiarowe stosowane w hydraulice siłowej. Pomiary ciśnienia, przepływu, temperatury, czystości oleju, itd. Testery, i urządzenia diagnostyczne do wykorzystania w układach hydraulicznych.

     

    Article Count:
    6

Hektos - Facebook